Travertine has a texture and look that other stones don't have. We restore that character, refilling, honing, and sealing so the floor looks the way it should.
It’s a porous stone with natural variation in tone: creams, beiges, soft browns. That warmth is why people choose it.
But the same texture that makes travertine distinctive also makes it harder to maintain. Dirt settles into the holes. Filler cracks or comes loose. The surface dulls unevenly.
Restoring it properly means understanding how the stone behaves, not just polishing over the top, and after 25 years, we’ve seen hundreds of Sydney homes with every possible issue.
These are the issues we see most often, and what we look for when assessing your floor.
The signs build gradually. First filler wears down or loosens, leaving holes exposed. Dirt settles into those gaps and won’t mop out. High-traffic areas lose their finish first, hallways go flat, while the edges of the room still have some life.
Staining is common, too. Travertine is porous, and spills that sit too long absorb into the stone rather than staying on the surface.
But this does not mean the stone is ruined. It means it’s due for proper attention, and our technicians can help immediately.
Every floor is different, so we start with an assessment, checking the filler, the surface condition, and how the stone has worn.
From there, the process depends on what’s needed. Holes are cleaned out and refilled where necessary. The surface is honed to remove wear and bring back an even finish. If you prefer a polished result, we take it further. If you’d rather keep it honed, we leave it there.
Once the stone is restored, we seal it. Travertine is porous, and a good penetrating sealer gives you time to clean up spills before they become stains.
The goal is a floor that looks right and stays that way, so you don’t keep calling back every few months.
Travertine can be finished in two ways. Filled, where the natural holes are levelled with a colour-matched compound for a smoother surface. Or unfilled, where the voids are left open for a more textured, rustic look.
Most floors we see were installed filled, but over time, that filler wears down or comes loose. Part of the restoration is deciding whether to refill or leave some texture exposed.
We can work either way. If you want a cleaner, more refined finish, we refill and hone smoothly. If you prefer the stone’s natural character on show, we restore around it.
It comes down to how you want the floor to feel.

Here are some common questions about our stone care services.
Acidic cleaners etch the surface, and what looks like a stain is often physical damage to the stone.
This can’t be wiped or scrubbed away. The affected area needs to be honed back to remove the etching and then repolished to match the surrounding floor.
It depends on the look you want.
If your floor was installed filled and the filler has worn or come loose, we’d typically refill before honing. If it were left unfilled for a more rustic finish, we could restore it that way. We’ll assess what suits the floor and your preference.
DIY kits don’t offer the control or range of abrasives needed to work travertine evenly. It’s easy to create swirl marks, uneven patches, or push filler out of the holes.
Most DIY attempts we see end up costing more to correct than having it done properly in the first place.
Mopping removes surface dirt, but it won’t fix dullness caused by wear or product buildup. If your floor looks hazy even when clean, the issue is usually residue from the wrong cleaner sitting on the surface, or the finish itself has worn down.
A professional clean or light hone will bring clarity back.
Travertine floors don’t come back on their own. The longer the wear, the filler loss, and the grime is left in those holes, the more involved the restoration becomes.
We’ll assess your floor in person, explain what’s actually going on, and give you a clear quote. No obligation, no pressure, just straight advice from a team that works with travertine regularly.
Ready to see your travertine restored? Fill out the form or give us a call.
FREE ON-SITE MEASURE AND QUOTE
At Complete Stone Care, we recognise that your marble and natural stone surfaces are significant investments, enhancing the beauty and value of your property. Stone is beautiful to look at, but must be maintained to keep that lusterous appeal about it.
Serving the Sydney community, we specialise in marble polishing, stone restoration, and marble floor repair, delivering exceptional results that rejuvenate your spaces.
Do you have stone floors that need renovation? Are you looking for the best stone restoration services in Sydney? There is nothing richer-looking than an interior blessed with natural polished stone that gleams with so much shine that it is almost impossible to believe.
When it comes to preserving the timeless elegance of marble, granite, or limestone, professional stone restoration services are essential. Who you choose to restore your precious marble floors, benchtops, or limestone will be the difference in how the end result of your floors presents and we do consider ourselves the best stone restoration services in Australia, not just Sydney.
Years of foot traffic, spills, and everyday wear can cause these surfaces to lose their natural shine, develop scratches, and show visible signs of damage. This is only normal for wear and tare. We help remove scratches from marble floors in Sydney, marble walls, kitchen bench tops as well as limestone restoration and repair, granite and other stone surfaces.
Our specialised restoration process, which comes from years of experience in our industry, breathes new life into your stone surfaces, rejuvenating their lustre and giving your floor a fresh new lease on life. Whether it be limestone, marble floor polishing or bench top restorations, we cover it all.
All floor polishing restoration or repair work requires pre inspections. The first step in our stone restoration process is a thorough inspection of your marble, granite, or limestone surfaces. We identify the type of damage—such as cracks, stains, or etching—and determine the best techniques to restore each specific stone. Obviously as you can see, no two jobs are ever the same when it comes to preparing various stone surfaces. Whether it’s a kitchen countertop, hotel lobby floor, or residential bathroom vanity, we tailor our approach to achieve optimal results or your requirements. Satisfied customers are happy customers.
Once we have established the type of damage your stone surfaces are suffering from, we have stone repair experts and trained technicians deep-clean your stone to remove dirt, grime, and any embedded contaminants.
We only ever use professional-grade cleaning equipment for cleaning and restoring natural damaged stone surfaces.
Proper cleaning ensures that the subsequent steps—like honing or polishing—are done on a surface free of debris, allowing for a truly flawless finish without scratches or imperfections left behind on the completion phase.
We go every step to ensure that before we commence polishing, your surfaces are 100% spotless from imperfections. This just ensures a shine that is just pure glass.
The final pass is always about protecting the achieved flawless finish and ensuring it lasts for as long as possible, considering the foot traffic which will be using your surfaces. The final pass is a protective sealant. This protective sealant is applied to guard against future spills, stains, and wear. Sealing helps maintain the newly restored finish and makes routine cleaning easier. Our advanced sealers are designed to penetrate the pores of each stone type, providing long-lasting defence against moisture and contaminants your stone surfaces may experience throughout their lifetime.
Marble and natural stone restoration is a highly skilled job. Stone can be ruined very easily by an inexperienced tradesman. You will find a lot of “Tile cleaning ” companies “fly-by nighters” offering this service and using extremely harsh abrasives and acids which can destroy your stone. When this occurs we can usually fix their mistakes but it can cost a lot more to sort out. Call the stone and marble restoration Sydney specialists and we will get it done right the first time guaranteed.
Our specialities are marble benchtop restoration, natural stone bathroom restoration, re-grouting services and sealing. We are extremely experienced in working with all beautiful natural stones; marble and limestone, Granite repairs, terrazzo restoration, and travertine restoration.
Natural stone attracts quite a bit of attention. If it is well-maintained, people admire its elegance. However, if it is neglected, dull, dirty, or damaged, it attracts the wrong kind of attention.
Having been providing services as marble restoration Sydney professionals for years now, we can help ensure your marble, limestone, travertine, granite, and terrazzo floors, benchtops, shower walls, and other surfaces create a positive impression for family, guests, and patrons.
Like any surface, natural stone can become scratched, chipped, etched, or dulled in appearance with time and use, or perhaps for the unfortunate few, with improper installation.
Don’t assume you have to live with the stone as it is or go to the expense of replacing it. Nothing could be further from the truth!
At Complete Stone Care and Protection, we know how to clean, polish, repair and restore your natural stone from scratches, blemishes, stains and geneeral wear and tear.
Complete Stone Care offers a complete Restoration & Maintenance solution to keep your Stone floors in prestige condition all year round. Our flexible operation hours cater to both evenings and weekends at no extra cost!
We have a team of dedicated stone restoration pros to get the job done seamlessly and efficiently with minimal interruptions to your business.
The floors and surfaces make a lasting impression for better or worse. With traffic and use, it can be difficult to keep your natural stone polished and spotless. The little flecks of marble in your terrazzo sparkling, or your tile and grout clean and fresh — even with regular cleaning and janitorial services.
Showcase your business in its best light with our commercial stone cleaning. Your business property is the public face of your organisation. It has a huge impact on how your customers perceive you. Beautifully maintained premises suggest caring, pride and success.
Showcase your business in its best light with our commercial stone cleaning. Your business property is the public face of your organisation. It has a huge impact on how your customers perceive you. Beautifully maintained premises suggest caring, pride and success.
When you enter commercial or retail spaces, such as offices, health care facilities and stores for example, what is one of the first things you notice? So, are your stone surfaces letting your business down? If that is the case, Complete Stone Care can help, with our professional commercial stone cleaning services.
We have been serving Sydney businesses for many years, providing commercial stone cleaning and maintenance at a huge variety of locations. Wherever you have natural stone in your building, we can clean and restore it, mending any signs of wear and tear and getting the finish back to its original beauty. We use only environmentally friendly, non-abrasive products that are completely safe and kind to your natural stone and to your customers.
From a stone benchtop at reception through to baths and showers in hotel rooms, we can clean, maintain and repair all natural stone surfaces, including marble, travertine, granite and many more.
We can even clean your floors for you, bringing out their luxurious good looks and protecting them from future damage. Our prices are highly competitive, but we never compromise on the excellent quality of our workmanship. We will even back it up with a 10-year warranty.
If you want your business to present its best face to the world, please contact us about our commercial stone cleaning services. Our highly experienced team is always happy to discuss your requirements.
Stop wondering how your marble, terrazzo, granite, or limestone floors could look—experience the transformation with Complete Stone Care. Well, don’t wonder any longer.
Whether your surfaces are dull, scratched, chipped, or stained, our expert team will restore their original beauty with professional stone restoration in Sydney.
Don’t wait any longer to give your stone the care it deserves! Fill out our enquiry form or call us directly at 1300 648 646 to speak with one of our stone restoration specialists. We’re happy to answer any questions and provide a tailored solution for your space.
Your stunning, polished stone floors are just a call away—get in touch today!